Asbestos is a mineral that was once commonly used in construction. However, it has since
been found to be harmful to human health, and its use has been banned in many countries.
Asbestos is a carcinogen and can cause serious illnesses such as mesothelioma and lung
cancer. As a result, any construction materials containing asbestos must be removed
properly. This process is known as asbestos abatement.

Asbestos abatement in Ogden, UT, involves the removal or isolation of asbestos-
containing materials in a controlled manner so that they do not pose a risk to workers or the
public. Here is what it involves:

1) Testing and Inspection

Asbestos testing/ inspections are conducted by a licensed professional to determine the
presence and concentration of asbestos in an existing structure. Samples are taken from
affected areas and analyzed in a laboratory, and reports are provided with detailed
information regarding the condition of the material. Testing equipment like air monitoring
devices or surface sampling kits may also be used to measure asbestos levels in the air.
Some signs of potential asbestos-containing materials include crumbling plaster, exposed
insulation, and damaged floor tiles. If there is any chance of asbestos presence on the
property, it is essential to hire a qualified professional to inspect the area.

2) Abatement Process

Asbestos removal in construction involves removing or encapsulating asbestos-containing
materials to reduce the risk of asbestos exposure. This process typically begins with a
survey to determine the scope and extent of asbestos-containing materials in an existing
structure. Once the survey is completed, abatement professionals will begin the removal or
encapsulation process using specialized tools and safety gear like respirators, protective
clothing, and disposable coveralls.

a) Demarcation: A containment system is built to isolate the affected area and ensure that
fibers do not spread.

b) Air Monitoring: The air quality in the abatement area needs to be monitored constantly so
machines are placed around the work site throughout the process.

c) Regulated Work Area: Work areas are divided into sections to control the spread of
asbestos fibers.

d) Removal: Asbestos-containing materials are carefully removed following established
safety protocols and disposed of in sealed containers that meet EPA regulations.

e) Cleanup: After the removal process, all surfaces must be wiped down with damp cloths
and HEPA vacuums to clean the area and remove any remaining fibers.

f) Repair/ Re-insulation: After the abatement is finished, any damaged materials must be
repaired or replaced with approved insulation or other non-toxic materials.

Call Asbestos Abatement Services in Ogden, UT, for professional help with removing
asbestos in construction work on residential and commercial properties. Our team of

qualified professionals can guide you through the entire process, from inspection to removal
and disposal.